Products

Cold Rolled Full Hard Material (CRFH)

Cold Rolled Full Hard Unprocessed Sheet is produced by UNICOIL for direct use by customers for applications that do not require any formability beyond very limited bending and/or roll forming and also as a feed for Hot Dip Galvanizing process (Flux & Furnace type). The steel is highly work-hardened, and exhibits a high resistance to denting, etc. with Hardness of Rockwell B 85 minimum.

Price:

Manufacturer: Universal Metal Coating Company (UNICOIL)

Category:
To request for a product price, please follow the technical specification as per attached form.

Download the RFQ

  RFQ

Description

Since the product is supplied directly after cold rolling without further processing, Full Hard Cold Rolled Unprocessed Sheet will have residual cold mill oils on the sheet surface. The product is supplied, in coil form, with precise thickness tolerance, by removing off-gauge coil ends.

Technical Data

Specification JIS G 3141
Grades SPCH-1B,
Thickness (mm) 0.18 to 1.50
Width (mm) Standard widths 1000, 1219, 1250
Thickness Tolerance ½ of JIS 3141
Width Tolerance ≤ 1200 mm  +5 / -0 mm
> 1200 mm  +6 / – mm
Surface Finish Bright ,as rolled, residual cold mill oil
Hardness (HRB) 85 Min
Coil ID 508 mm
Coil weight (tons)* 3 to 15

Technical Datasheet

*Note: CRFH material can also be supplied with off gauge material at ID with the coil weight range of 12 to 25 Mt

Related products